Course outcomes:

Course Code: C201	Course Name: MATHEMATICS – IV
C201.1:	Analyze the complex functions with reference to their analyticity, integration using Cauchy’s integral theorem
C201.2:	Find the Taylor’s and Laurent’s series expansion of complex functions
C201.3:	the bilinear transformation
C201.4:	Express any periodic function in term of sines and cosines
C201.5:	Express a non-periodic function as integral representation
C201.6:	Analyze one dimensional wave and heat equation

Course Code: C202	Course Name: STRENGHT OF MATERIALS
C202.1:	Analyze the statically determinate and indeterminate problems
C202.2:	Determine the stresses and strains in the members subjected to axial, bending
C202.3:	Evaluate the slope and deflection of beams subjected to loads.
C202.4:	Determine the principal stresses and strains in structural members

Course Code: C203	Course Name: FLUID MECHANICS
C203.1:	Apply conservation laws to derive governing equations of fluid flows
C203.2:	Compute hydrostatic and hydrodynamic forces
C203.3:	Analyze and design simple pipe systems
C203.4:	Apply principles of dimensional analysis to design experiments.
C204.4:	Compute drag and lift coefficients

Course Code: C204	Course Name: BUILDING MATERIALS , CONSTRUCTION AND PLANNING
C204.1:	The student will be able to identify various building materials required for construction & planning.

Course Code: C205	Course Name: SURVEYING
C205.1:	Calculate angles, distances and levels
C205.2:	Identify data collection methods and prepare field notes
C205.3:	Understand the working principles of survey instruments
C205.4:	Estimate measurement errors and apply corrections
C205.5:	Interpret survey data and compute areas and volumes

Course Code: C206	Course Name: STRENGHT OF MATERIALS - II
C206.1:	Determine stresses in the member subjected to Torsion
C206.2:	Analyze columns and struts
C206.3:	Understand the concept of direct and bending stresses
C206.4:	Analyze and design springs, thin and thick cylinders
C206.5:	Understand the concept of unsymmetrical bending

Course Code: C207	Course Name: FLUID MECHANICS – II
C207.1:	Understand the concepts o channel flows
C207.2:	Compute flow profiles in channel transitions and analyze hydraulic transients
C207.3:	Design the working proportions of hydraulic machines
C206.4:	Analyze and design springs, thin and thick cylinders

Course Code: C208	Course Name: STRUCTURAL ANALYSIS
C208.1:	Analyze Perfect , Imperfect And Redundant Frames
C208.2:	Formulate Equilibrium and compatibility equations for structural members
C208.3:	Analyze one dimensional and two dimensional problems using classical methods
C208.4:	Analyze indeterminate structures
C208.5:	Analyze structures for gravity loads, moving loads and lateral loads

Course Code: C209	Course Name: ENGINEERING GEOLOGY
C209.1:	Understand weathering process and mass movement
C209.2:	Distinguish geological formations
C209.3:	Identify geological structures and processes for rock mass quality
C209.4:	Identify subsurface information and groundwater potential sites through geophysical investigations
C209.5:	Apply geological principles for mitigation of natural hazards and select sites for dams and tunnels

Course Code: C210	Course Name: BUSINESS ECONOMICS AND FINANCIAL ANALYSIS
C210.1:	he students will understand the various Forms of Business and the impact of economic variables on the Business. The Demand, Supply, Production, Cost, Market Structure, Pricing aspects are learnt. The Students can study the firm’s financial position by analysing the Financial Statements of a Company.

Course Code: C211	Course Name: STRENGHT OF MATERIALS LAB
C211.1:	Conduct tension test on Materials like steel etc.
C211.2:	Conduct compression tests on spring, wood and concrete
C211.3:	Conduct flexural and torsion test to determine elastic constants
C212.4:	Determine hardness of metals

Course Code: C212	Course Name: COMPUTER AIDED DRAFTING – I LAB
C212.1:	· Master the usage of Autocad commands for drawing 2D & 3D building drawings required for different civil engineering applications

Course Code: C213	Course Name: SURVEYING LAB - I
C213.1:	Practically able to draw plans & maps to determine the areas before taking up any civil engineering works

Course Code: C214	Course Name: GENDER SENSITIZATION LAB
C214.1:	Students will have developed a better understanding of important issues related to gender in contemporary India.
C214.2:	Students will be sensitized to basic dimensions of the biological, sociological, psychological and legal aspects of gender. This will be achieved through discussion of materials derived from research, facts, everyday life, literature and film
C214.3:	Students will attain a finer grasp of how gender discrimination works in our society and how to counter it.
C214.4:	Students will acquire insight into the gendered division of labour and its relation to politics and economics
C214.5:	Men and women students and professionals will be better equipped to work and live together as equals
C214.6:	Students will develop a sense of appreciation of women in all walks of life.
C214.7:	Through providing accounts of studies and movements as well as the new laws that provide protection and relief to women, the textbook will empower students to understand and respond to gender violence

Course Code: C215	Course Name: FLUID MECHANICS LAB
C215.1:	Determine coefficient of discharge for orifice and mouthpiece.
C215.2:	Calibrate notches venturimeter orifice meters
C215.3:	Determine miner losses in pipes
C212.4:	Determine hardness of metals

Course Code: C213	Course Name: SURVEYING LAB - I
C213.1:	Practically able to draw plans & maps to determine the areas before taking up any civil engineering works

Course Code: C215	Course Name: SURVEYING – I LAB
C215.1:	Perform surveying on any civil engineering work

Course Code: C216	Course Name: ENGINEERING GEOLOGY LAB
C216.1:	Study of physical properties and identification of minerals referred under theory
C216.2:	Megascopic description and identification of rocks referred under theory
C216.3:	Microscopic study of rocks.
C216.4:	Interpretation and drawing of sections for geological maps showing tilted beds, faults, uniformities etc.
C216.5:	Simple Structural Geology problems
C216.6:	Electrical resistivity meter.

Course Code: C217	Course Name: ENVIRONMENTAL SCIENCE AND TECHNOLOGY
C217.1:	Based on this course, the Engineering graduate will understand /evaluate / develop technologies on the basis of ecological principles and environmental regulations which inturn helps in sustainable development

Course Code: C301	Course Name: CONCRETE TECHNOLOGY
C301.1:	Identify Quality Control tests on concrete making materials
C301.2:	Understand the behavior of fresh and hardened concrete
C301.3:	Design concrete mixes as per IS and ACI codes
C301.4:	Understand the durability requirements of concrete
C301.5:	Understand the need for special concretes

Course Code: C302	Course Name: DESIGN REINFORCED CONCRETE STRUCTURES
C302.1:	Design RC Structural elements
C302.2:	Design the Reinforced Concrete beams using limit state Design
C302.3:	Design Reinforced Concrete slabs
C302.4:	Design the Reinforced Concrete Columns and footings
C303.5:	Design structures for serviceability
C303.6:	Design staircases, canopy

Course Code: C303	Course Name: WATER RESOURCES ENGINEERING
C303.1:	Analyze hydro-meteorological data
C303.2:	Estimate abstractions from precipitation
C303.3:	Compute yield from surface and subsurface basin
C303.4:	Develop rainfall-runoff models
C303.5:	Formulate and solve hydrologic flood routing models
C303.6:	Estimate runoff, design discharge from catchment

Course Code: C304	Course Name: FUNDAMENTALS OF MANAGEMENT
C304.1:	The students understand the significance of Management in their Profession. The various Management Functions like Planning, Organizing, Staffing, Leading, Motivation and Control aspects are learnt in this course. The students can explore the Management Practices in their domain area

Course Code: C305	Course Name: PROFESSIONAL ETHICS
C305.1:	The students will understand the importance of Values and Ethics in their personal lives and professional careers. The students will learn the rights and responsibilities as an employee, team member and a global citizen.

Course Code: C306	Course Name: DESIGN OF STEEL STRUCTURES
C306.1:	Design tension and compression members
C306.2:	Design beams and beam columns
C306.3:	Design bolt and weld connections
C306.4:	Design built up members and Column base
C306.5:	Design built up members and Column base

Course Code: C307	Course Name: ENVIRONMENTAL ENGINEERING
C307.1:	Analyze characteristics of water and wastewater
C307.2:	Estimate the quantity of drinking water and domestic wastewater generated
C307.3:	Design components of water supply systems Design sewerage system

Course Code: C308	Course Name: SOIL MECHANICS
C308.1:	Understand the mechanism Behaviour of Soil for different loads
C308.2:	and from Soil Condition will be able to determine properties of soil

Course Code: C309	Course Name: AIR POLLUTION AND CONTROL
C309.1:	Identify sampling and analysis techniques for air quality assessment
C309.2:	Describe the plume behavior for atmospheric stability conditions
C309.3:	Able to control air pollution by properties various techniques to control

Course Code: C310	Course Name: ADVANCED STRUCTURAL ANALYSIS
C310.1:	Demonstrate the concepts of qualitative influence line diagram for continuous beams and frames.
C310.2:	Apply the methods of indeterminate truss analysis
C310.3:	Demonstrate the behavior of arches and their methods of analysis analyze cable suspension bridges
C310.4:	Analyze multistory frames subjected to gravity loads and lateral loads

Course Code: C311	Course Name: GROUND WATER DEVELOPMENT AND MANAGEMENT
C311.1:	The student will be able to Understand Ground Water occurrence, Ground Water Movement Well constructional etc.

Course Code: C312	Course Name: EARTH AND ROCKFILL DAMS AND SLOPE STABILITY
C312.1:	Describe the behaviour of natural and engineered soil / rock slopes under various weather and engineering conditions
C312.2:	Explain the factors that may affect the stability of slopes
C312.3:	Select an appropriate slope stability analysis method subject to geometry of slope, material properties, and uncertainty of observations
C312.4:	Assess the potential landslide risk of slopes

Course Code: C313	Course Name: CONCRETE TECHNOLOGY LAB
C313.1:	Understand properties of concrete material, behavior of concrete & properties of fresh & hardened concrete

Course Code: C314	Course Name: GEOGRAPHICAL INFORMATION SYSTEM LAB
C314.1:	The student is exposed to spatial technologies, mapping the field problems and solution convergence through GIS.

Course Code: C315	Course Name: HYDRAULICS AND HYDRAULIC MACHINERY
C315.1:	Compute drag coefficients
C315.2:	Test the performance of pumps and turbines
C315.3:	Determine Manning’s and Chezy’s coefficients for smooth and rough channels
C315.4:	Determine Energy loss in Hydraulic jump and Calibrate standing wave flume

Course Code: C316	Course Name: SOIL MECHANICS LAB
C316.1:	The student will be able to Classify and evaluate the behavior of the soils subjected to various loads.

Course Code: C317	Course Name: COMPUTER AIDED DRAFTING – II LAB
C317.1:	The student will be able to Student can draft various structures

Course Code: C318	Course Name: ADVANCED ENGLISH COMMUNICATION SKILLS (AECS) LAB
C318.1:	Acquire vocabulary and use it contextually
C318.2:	Listen and speak effectively
C318.3:	Develop proficiency in academic reading and writing
C318.4:	Increase possibilities of job prospects
C318.5:	Communicate confidently in formal and informal contexts